3Z TELECOM 3Z RFV-2000 REPAIR and 3Z TELECOM 3Z RFV-2000 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the 3Z TELECOM 3Z RFV-2000. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the 3Z TELECOM 3Z RFV-2000 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Component?
Shop for Comparable Products on our  used RF Component page or new RF Component page

 
   3Z TELECOM 3Z RFV-2000   Description / Specification:    
3Z TELECOM 3Z RFV-2000 RF Vision Antenna Alignment Tool

The 3Z Telecom 3Z-RFV-2000 Antenna Alignment Tool incorporates GPS Technology provides a visual guide to show where the antenna is pointing. The RF Vision’s augmented reality displays a bullseye target in the 5-inch
LCD touch screen display. Now the tower tech can perfectly align the antenna by simply moving the crosshair over to align the bullseye in one easy step. The touch screen display is responsive to touch in most work gloves, letting you keep your hands protected and warm in cold conditions. Dual frequency technology allows RF Vision to measure each satellite twice, seeing a total of 174 satellites signals. RF Vision will create a single comprehensive PDF or CSV report for each site being aligned. Retrieve reports easily via the built-in micro-USB port. Specifications.

Dimensions.
Length: 13.3" (338 mm).
Width: 5.6" (141 mm).
Height: 4.6" (118 mm).
Weight: 4.2 lbs (1.90 kg).

Accuracy
Azimuth/Heading: 0.5° RMS.
Tilt: +/- 0.1° (Typical).
Roll: +/- 01° (Typical).
Horizontal Position SBAS (WAAS): 0.82 ft. (0.25m) RMS.
Height: 0.04" (1mm) Typical with 3ZRFA-LRF Laser Rangefinder.



 

Standard Calibration $485.00 *
*This is a Web introductory price for one calibration of the 3Z TELECOM 3Z RFV-2000. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Spurious Signals
Spurious signals are undesired signals. They can be considered in two classes. They can be stationary; their frequency and amplitude do not change significantly, or non-stationary, where the frequency and/or amplitude change significantly over short time periods.

Please contact us for your 3Z TELECOM 3Z RFV-2000 REPAIR and/or 3Z TELECOM 3Z RFV-2000 RF Vision Antenna Alignment Tool CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: